Actions in this document
#What it does
A single document can carry more than one action. Each is recorded separately, with its own effect on the register.
- NOTICEInterim review initiated
#The notice
As published in the C series of the Official Journal.
C_202601384EN.000101.fmx.xml
Official Journal
of the European Union
EN
C series
C/2026/1384
10.3.2026
Notice of initiation of a partial interim review of the anti-dumping measures applicable to imports of aluminium flat-rolled products originating in the People’s Republic of China
(C/2026/1384)
The European Commission ('the Commission') received a request for a partial interim review of the anti-dumping measures applicable to imports of aluminium flat-rolled products, originating in the People’s Republic of China (‘PRC’), pursuant to Article 11(3) of Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union
(
1
)
('the basic Regulation'). The partial interim review is limited to the product scope.
1.
Request for review
The request was lodged on 19 May 2025 by the Union importer PalNet ('the applicant').
An open version of the request is available in the file for inspection by interested parties. Section 5.4 of this Notice provides information about access to the file for interested parties.
2.
Product under review
The product subject to this review is aluminium products, flat rolled, whether or not alloyed, whether or not further worked than flat rolled, not backed, without internal layers of other material, (i) in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more but not more than 6 mm, (ii) in plates, of a thickness of more than 6 mm, (iii) in coils or in coiled strips, of a thickness of not less than 0,03 mm but less than 0,2 mm (‘the product under review’), currently falling under CN codes ex 7606 11 91 (TARIC codes 7606 11 91 25, 7606 11 91 86), ex 7606 11 93 (TARIC codes 7606 11 93 25, 7606 11 93 86), ex 7606 11 99 (TARIC codes 7606 11 99 25, 7606 11 99 86), ex 7606 12 92 (TARIC codes 7606 12 92 25, 7606 12 92 93), ex 7606 12 93 (TARIC code 7606 12 93 86), ex 7606 12 99 (TARIC codes 7606 12 99 25 and 7606 12 99 86), ex 7606 91 00 (TARIC codes 7606 91 00 25, 7606 91 00 86), ex 7606 92 00 (TARIC codes 7606 92 00 25, 7606 92 00 92), ex 7607 11 90 (TARIC codes 7607 11 90 48, 7607 11 90 51, 7607 11 90 53, 7607 11 90 65, 7607 11 90 73, 7607 11 90 75, 7607 11 90 77, 7607 11 90 91, 7607 11 90 93) and ex 7607 19 90 (TARIC codes 7607 19 90 75, 7607 19 90 94). The CN and TARIC codes are given for information only without prejudice to a subsequent change in the tariff classification.
3.
Existing measures
The measures currently in force are a definitive anti-dumping duty imposed by Commission Implementing Regulation (EU) 2021/1784
(
2
)
(‘the original investigation’).
4.
Grounds for the review
The request is based on sufficient evidence provided by the applicant that the scope of the existing measure can be amended to exclude a specific type of the product concerned used for a very specific and limited type of application.
The applicant alleged that aluminium sheets made from alloys of the 7000-series (including but not limited to alloy 7021-T6), used for the manufacture of certified Unit Load Devices (‘ULD’) for the civil aviation and air cargo sectors, were covered by the original product scope.
The applicant also provided evidence that this specific type of the product under review is not produced in the EU and that it cannot be sourced elsewhere in sufficient quantities with the required combination of dimensions and alloy types. These product requirements are based on strict Regulations applicable only to the aviation sector.
As a result, the imposition of the anti-dumping measures on these products allegedly jeopardizes the survival of the sole Union-based ULD manufacturer, in view of the impossibility to absorb the proposed duties given its cost structure and profitability levels, and the inexistence of any other viable alternatives that would enable the company to remain competitive in the market. In addition, it is alleged that this would not lead to a recurrence of injury to the Union industry.
Therefore, the applicant requests an exclusion from the product scope of aluminium sheets made from alloys of the 7000-series (including but not limited to alloy 7021-T6), used exclusively for the manufacture of certified ULDs for the civil aviation and air cargo sectors.
5.
Procedure
Having determined, after informing the Member States, that sufficient evidence exists to justify the initiation of a partial interim review limited to the product scope, the Commission hereby initiates a review in accordance with Article 11(3) of the basic Regulation.
5.1.
Comments on the request and the initiation of the investigation
All interested parties wishing to comment on the request or any aspects regarding the initiation of the investigation (including the degree of support for the request) must do so within 37 days of the date of publication of this Notice in the
Official Journal of the European Union
(
3
)
.
Any request for a hearing with regard to the initiation of the investigation must be submitted within 15 days of the date of publication of this Notice.
5.2.
Interested parties
In order to participate in the investigation, interested parties, such as producers in the country concerned, Union producers, importers and their representative associations, users and their representative associations, trade unions and representative consumer organisations first have to demonstrate that there is an objective link between their activities and the product under review.
Producers in the country concerned, Union producers, importers and representative associations who made information available will be considered as interested parties if there is an objective link between their activities and the product under review.
Other parties will only be able to participate in the investigation as interested party from the moment they make themselves known, and provided that there is an objective link between their activities and the product under review. Being considered as an interested party is without prejudice to the application of Article 18 of the basic Regulation.
Access to the file available for inspection for interested parties is made via Tron.tdi at the following address:
https://tron.trade.ec.europa.eu/tron/TDI
. Please follow the instructions on that page to get access
(
4
)
.
5.3.
Other written submissions
Subject to the provisions of this Notice, all interested parties are hereby invited to make their views known, submit information and provide supporting evidence. Unless otherwise specified, this information and supporting evidence must reach the Commission within 37 days of the date of publication of this Notice.
5.4.
Possibility to be heard by the Commission investigation services
All interested parties may request to be heard by the Commission investigation services. Any request to be heard must be made in writing and must specify the reasons for the request as well as a summary of what the interested party wishes to discuss during the hearing. The hearing will be limited to the issues set out by the interested parties in writing beforehand.
In principle, hearings will not be used to present factual information which is not yet on file. Nevertheless, in the interest of good administration and to enable Commission services to progress with the investigation, interested parties may be directed to provide new factual information after a hearing.
5.5.
Instructions for making written submissions and sending correspondence
Information submitted to the Commission for the purpose of trade defence investigations shall be free from copyrights. Interested parties, before submitting to the Commission information and/or data which is subject to third party copyrights, must request specific permission to the copyright holder explicitly allowing the Commission a) to use the information and data for the purpose of this trade defence proceeding and b) to provide the information and/or data to interested parties to this investigation in a form that allows them to exercise their rights of defence.
All written submissions, including the information requested in this Notice, completed questionnaires and correspondence provided by interested parties for which confidential treatment is requested shall be labelled ‘Sensitive’
(
5
)
. Parties submitting information in the course of this investigation are invited to reason their request for confidential treatment.
Parties providing ‘Sensitive’ information are required to furnish non-confidential summaries of it pursuant to Article 19(2) of the basic Regulation, which will be labelled 'For inspection by interested parties'. These summaries must be sufficiently detailed to permit a reasonable understanding of the substance of the information submitted in confidence. If a party providing confidential information fails to show good cause for a confidential treatment request or does not furnish a non-confidential summary of it in the requested format and quality, the Commission may disregard such information unless it can be satisfactorily demonstrated from appropriate sources that the information is correct.
Interested parties are invited to make all submissions and requests via TRON.tdi (
https://tron.trade.ec.europa.eu/tron/TDI
) including requests to be registered as interested parties, scanned powers of attorney and certification sheets. By using TRON.tdi or email, interested parties express their agreement with the rules applicable to electronic submissions contained in the document ‘CORRESPONDENCE WITH THE EUROPEAN COMMISSION IN TRADE DEFENCE CASES’ published on the website of the Directorate-General for Trade:
https://europa.eu/!7tHpY3
. The interested parties must indicate their name, address, telephone and a valid email address and they should ensure that the provided email address is a functioning official business email which is checked on a daily basis. Once contact details are provided, the Commission will communicate with interested parties by TRON.tdi or email only, unless they explicitly request to receive all documents from the Commission by another means of communication or unless the nature of the document to be sent requires the use of a registered mail. For further rules and information concerning correspondence with the Commission including principles that apply to submissions via TRON.tdi and by email, interested parties should consult the communication instructions with interested parties referred to above.
Commission address for correspondence:
European Commission
Directorate-General for Trade
Directorate G
Office: CHAR 04/039
1049 Bruxelles/Brussel
BELGIQUE/BELGIË
TRON. tdi:
https://tron.trade.ec.europa.eu/tron/tdi
Email:
TRADE-R849-ALU-FLAT-EUE@ec.europa.eu
6.
Schedule of the investigation
The investigation shall normally be concluded within 12 months and in any event no later than 15 months from the date of the publication of this Notice, pursuant to Article 11(5) of the basic Regulation.
7.
Submission of information
As a rule, interested parties may only submit information in the timeframes specified in section 5 of this Notice.
In order to complete the investigation within the mandatory deadlines, the Commission will not accept submissions from interested parties after the deadline to provide comments on the final disclosure or, if applicable, after the deadline to provide comments on the additional final disclosure.
8.
Possibility to comment on other parties' submissions
In order to guarantee the rights of defence, interested parties should have the possibility to comment on information submitted by other interested parties. When doing so, interested parties may only address issues raised in the other interested parties' submissions and may not raise new issues.
Comments on the information provided by other interested parties in reaction to the disclosure of the definitive findings should be submitted within 5 days from the deadline to comment on the definitive findings, unless otherwise specified. If there is an additional final disclosure, comments on the information provided by other interested parties in reaction to this further disclosure should be made within 1 day from the deadline to comment on this further disclosure, unless otherwise specified.
The outlined timeframe is without prejudice to the Commission's right to request additional information from interested parties in duly justified cases.
9.
Extension to time limits specified in this Notice
Any extension to the time limits provided for in this Notice should only be requested in exceptional circumstances and will only be granted if duly justified. In any event, any extensions to the deadline to reply to questionnaires will be limited normally to 3 days, and as a rule will not exceed 7 days. Regarding time limits for the submission of other information specified in the Notice of initiation, extensions will be limited to 3 days unless exceptional circumstances are demonstrated.
10.
Non-cooperation
In cases where any interested party refuses access to or does not provide the necessary information within the time limits, or significantly impedes the investigation, findings, affirmative or negative, may be made on the basis of facts available, in accordance with Article 18 of the basic Regulation.
Where it is found that any interested party has supplied false or misleading information, the information may be disregarded and use may be made of facts available.
If an interested party does not cooperate or cooperates only partially and findings are therefore based on facts available in accordance with Article 18 of the basic Regulation, the result may be less favourable to that party than if it had cooperated.
Failure to give a computerised response shall not be deemed to constitute non-cooperation, provided that the interested party shows that presenting the response as requested would result in an unreasonable extra burden or unreasonable additional cost. The interested party should immediately contact the Commission.
11.
Hearing Officer
Interested parties may request the intervention of the Hearing Officer in trade proceedings. The Hearing Officer reviews requests for access to the file, disputes regarding the confidentiality of documents, requests for extension of time limits and any other request concerning the rights of defence of interested parties and third parties as may arise during the proceeding.
The Hearing Officer may organise hearings and mediate between the interested party/-ies and Commissions services to ensure that the interested parties' rights of defence are being fully exercised. A request for a hearing with the Hearing Officer should be made in writing and should specify the reasons for the request. The Hearing Officer will examine the reasons for the requests. These hearings should only take place if the issues have not been settled with the Commission services in due course.
Any request must be submitted in good time and expeditiously so as not to jeopardise the orderly conduct of proceedings. To that effect, interested parties should request the intervention of the Hearing Officer at the earliest possible time following the occurrence of the event justifying such intervention. Where hearing requests are submitted outside the relevant timeframes, the Hearing Officer will also examine the reasons for such late requests, the nature of the issues raised and the impact of those issues on the rights of defence, having due regard to the interests of good administration and the timely completion of the investigation.
For further information and contact details interested parties may consult the Hearing Officer's web pages on DG Trade's website:
https://policy.trade.ec.europa.eu/contacts/hearing-officer_en
.
12.
Processing of personal data
Any personal data collected in this investigation will be treated in accordance with Regulation (EU) 2018/1725 of the European Parliament and of the Council
(
6
)
.
A data protection notice that informs all individuals of the processing of personal data in the framework of Commission’s trade defence activities is available on DG Trade’s website:
https://europa.eu/!vr4g9W
(
1
)
OJ L 176, 30.6.2016, p. 21
, ELI:
http://data.europa.eu/eli/reg/2016/1036/oj
.
(
2
)
OJ L 359, 11.10.2021, p. 6
, ELI:
http://data.europa.eu/eli/reg_impl/2021/1784/oj
.
(
3
)
All references to the publication of this Notice will be references to publication of this Notice in the
Official Journal of the European Union
, unless otherwise specified.
(
4
)
In case of technical problems please contact the Trade Service Desk by email
trade-service-desk@ec.europa.eu
or by telephone +32 22979797.
(
5
)
A ‘Sensitive’ document is a document which is considered confidential pursuant to Article 19 of the basic Regulation and Article 6 of the WTO Agreement on Implementation of Article VI of the GATT 1994 (Anti-Dumping Agreement). It is also a document protected pursuant to Article 4 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council (
OJ L 145, 31.5.2001, p. 43
).
(
6
)
Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (
OJ L 295, 21.11.2018, p. 39
, ELI:
http://data.europa.eu/eli/reg/2018/1725/oj
).
ELI: http://data.europa.eu/eli/C/2026/1384/oj
ISSN 1977-091X (electronic edition)
How to cite this page
52026XC01384. Countermeasures Reference, Lawcrosse. https://lawcrosse-countermeasures.vercel.app/eu/documents/52026XC01384.html. Information current through 2026-09-01. Sources last checked 2026-09-12.